CPFM Common Rail Fuel Pump Performance Measurement Unit
new 
The CPFM-Tester device is designed to test and verify the performance of diesel injection pumps (high pressure fuel pumps) of the Common Rail system.
The device has two channels for measuring the strait. In each meter (sensor) of the strait is a temperature sensor that measures the temperature of the liquid (flow).
Note. The delivery set may differ (for example, by the presence of filters), depending on the availability in the warehouse, with subsequent retrofitting.
Specification
| Range of the measured stream | 0,05 - 20 l / min |
|---|---|
| Range of the measured stream | 3–1200 l / hour |
| Accuracy of flow measurement, in the range of 10-150l / hour, not more than | +/- 2l / hour |
| Accuracy of flow measurement, in the range up to 10 and more than 150 l / h | not more than 1% |
| Permissible temperature range of the measured flow | -20 - +90 ° C |
| Error of measurement of temperature of a stream, no more | +/- 2 ° C |
| Supply voltage | ~ 220 V ± 15% |
| Mass of the device | 6 kg |
| Dimensions (length x width x height) | 320x285x80 |
| Power consumption, no more | 24 W. |
Packaging
| Pasport ОS.25-02. (Technical description, instruction of use) | 1 pc. |
|---|---|
| Controller ОS.25-02 | 1 pc. |
| Power cable 220V | 1 pc. |
| Safety fuse 3A (located inside the holder) | 1 pc. |
| External filter (50mkm) | 2 pcs. |
| Clamps (15) | 8 pcs. |
| Valve wire (2м) | 2 pcs. |
| Software “CPFlowMeter” (CD). | |
Documentation
- CPFM PDF, 864 KB